Alva Alva Nanoface
Home > Audio Home Studio > Audio Interfaces > Usb
 |
Alva Alva Nanoface Alva Alva Nanoface Most interfaces provide a big software package with useful features, but have a steep learning curve and consume the most important thing a musician doesn’t have. Time. Time to mess with all the technical stuff. But creativity needs boundaries. In an unlimited space there is no need to be creative, as all destinations can be reached – with just some knowledge and craftsmanship. The ALVA designers decided to try another way: Sensible downsizing. The Nanoface is designed as partner of modern digital audio workstations. ?There are no software option dialogs or an integrated mixer. Just a high-speed driver. All modern audio programs provide a low latency engine, an integrated mixer with plug-in support and monitoring features. They emulate a complete studio workflow. Some audio interfaces try to do the same and thus doubling not only the features, but also the time to mess with them. The Nanoface is different. All features can be controlled with ONE multi controller. Directly on the unit. In combination with an audio sequencer this is what most all musicians need. No more. No less. If you want to use a mixer, with sends, busses and effects – it’s already in your DAW software. Reduce. Be creative. The usability concept of the Nanoface The analog gains for the four inputs, all output levels and special features, like phantom power and hardware monitoring will be controlled with the big silver rotary encoder directly on the Nanoface. All mixing, channel routing and digital levels will be controlled by your individual audio software. What can be controlled with the Encoder: -> Output 1/2: gain -> Output 3/4 (Phones): gain -> Route output 1/2 to Phones output -> Output 1/2 on Phones output: gain -> Input 1/2: gain (mic/instr. preamps) -> Input 3/4: gain -> 48V for inputs 1 and/or 2 -> Switch input 2 to Hi-Z input -> Hardware monitoring for inputs 1/2 -> Reset to default values Example: Duplicate the output signal 1/2 on the headphones In the default mode the phones output plays the signal from channel 3/4. To duplicate the output 1/2 on the headphones (e. g. for mp3 music playback) it takes two steps: 1. Select the phones mode by clicking the encoder until LED phones + 3/4 shine. 2. Click/turn Encoder left. LED 3/4 turns off. The headphones are switched to output 1/2. Audio Pro Home Studio > Audio Interfaces > Usb Alva Alva Nanoface: Weitere Informationen... |
Encore Notation SoftwareWrite, Play and Print Music Arrange, transpose your midifiles and create perfect scores and sheet music for your students. It was never easier! Order Encore Notation now! |
MP3.Quest | Music.vg | Musik.cc | Musikprof.de | Notenbuch download