Igs Audio Cool Miner
Home > Audio Home Studio > Analog gears > Channel Strip
 |
Igs Audio Cool Miner Igs Audio Cool Miner The COOL MINER Channel is built of two independent blocks. The first is a typical mic-line preamp and the other is a 1176 type transistor compressor. Both blocks are well-known, classical structures, also available as separate IGS Audio devices (NE72 preamp and Volfram compressor). The COOL MINER has separate input and output XLR connectors for both blocks. So you can use the preamp and compressor separately or combine them together using the LINK switch on the front of the device. The Preamp installed in the device has two degrees of amplification. After the input balanced transformer it is possible to use the pad in increments of 3 dB between the mic and line level (this is a new solution, used for the first time in the IGS Audio). Furthermore you can select from 12 positions for audio track amplification up to 60dB in 3dB increments. In addition, the preamp is equipped with a HiZ instrument input. To activate the HiZ input just connect the signal using a 6.3 mm Jack on the front. The device switches to the HiZ mode automatically. Other switches in the AMP section are: +48 V and PHASE. * Note: when the input is connected via HiZ the Mic input does not work. The second section of the COOL MINER is the compressor. It is a classic FET type compressor known from the 70s – a balanced input based on the modern op-amp. Line transformer on output, driven by A-class transistor circuit. Additional features: Relay bypass and Ratio settings 1:1 and 2:1, not included in the original 1176. Key features of the compressor are: - Stepped gain control: Input and Output - Mic/Line operation - Phantom power, Pad, Phase reverse - Ratio: 1:1, 2:1, 4:1, 8:1, 12:1, 20:1 - SLAM mode - 120Hz HPF Sidechain Filter - 3 position Attack and Release switches: Fast, Mid, Slow - GR / VU mode meter indication - Relay Bypass - Analog VU meter * Note: VU / GR meter applies only to the compressor section. If you want o connect a VU meter to the preamp, use the LINK and set the COMP switch in the OUT position. Applications: The typical application of this device is a recording chain for vocal and guitar microphones. It also works perfectly well as a independent preamp or compressor. Technical data: - Inputs: 1 Mic/Line XLR and 1 HiZ Jack on the front + one compressor input - Outputs: one for mic preamp and one for the compressor - Transistor audio path - 3 transformers in the audio path - Operating Level +4dB - Maximum Output +32 dBV, - Meters reads Output VU or Gain Reduction, - Gain Boost 90dB - THD < 0.1% @ 1Khz - Bandwidth: 20Hz - 20kHz; +/- 0.1dB - Power consumption: 18 watts - Hard wire Bypass - Shipping weight: 6 kilos Audio Pro Home Studio > Analog gears > Channel Strip Igs Audio Cool Miner: Weitere Informationen... |
Encore Notation SoftwareWrite, Play and Print Music Arrange, transpose your midifiles and create perfect scores and sheet music for your students. It was never easier! Order Encore Notation now! |
MP3.Quest | Music.vg | Musik.cc | Musikprof.de | Notenbuch download